Apricorn Aegis Vault User's Guide download pdf (Page 11)

www.apricorn.com 11

changes depending on drive state

When the Aegis Vault is in the locked state the button reads Unlock. The

user or drive administrator needs to check the appropriate radio button

(User or Administrator) and enter a password to unlock the drive. In this

state the message eld at the bottom of the window will read: Vault Drive

is Unlocked. Once the Aegis Vault is unlocked the encrypted data on the

drive may be accessed.

When the Aegis Vault is in the unlocked state the button reads Lock.

Pressing the button when it reads Lock will render the drive’s encrypted

contents inaccessible. In this state the message at the bottom of the main

window will read: Vault Drive is Locked.

Note: Closing the Vault Program or Exiting the Vault Tray DOES NOT

LOCK THE DRIVE. Removing the drive or using the Lock button are the

only two ways to lock the drive.

Rescan: Will scan your computer to detect the presence of an Aegis Vault.

If you start the VaultConsole program without the drive attached click

the “Rescan” button to locate the Aegis Vault and then choose user or

administrator and enter the password to unlock the Aegis Vault.

6. VAuLTrESIzE prOGrAm

To start the VaultResize program, go to:

Start|All Programs|Apricorn|Aegis Vault Software and click on

VaultResize.

Note: If you try to run the VaultResize program when VaultTray is running,

you will receive the following error: Another instance of Vault Software

is running. Program will now exit. The VaultTray icon in the system tray

indicates the program is running. To exit the VaultTray program right click

on the VaultTray icon and select Exit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Apricorn Aegis Vault User's Guide Page 11